Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls The ShopFloorConnect Machine Interface (SMI

The ShopFloorConnect Machine Interface (SMI 2) is the fastest way to connect virtually any machine to the ShopFloorConnect Machine Monitoring Software

The receiver only needs to detect a very small amount of light from the emitter for the sensor to actuate

failed transfer

or dry contact closure to ground) for cycle

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls The ShopFloorConnect Machine Interface (SMIWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,