Johnny Joint Rod End 2 1/2 Inch Weld-On 2.365 Inch X 0.562 Inch Ball Externally Greased Each RockJock 4x4 Drivetrain & Differentials - Transfer Case Seals & Bearings - Transfer Case Intermediate Shaft Bearing 1966-1971 Oldsmobile 442 (Front)

1966-1971 Oldsmobile 442 (Front)

1 inch (1323mm) Long

Instructions

This baffle is designed to be used in the Holley P/N 302-3

Johnny Joint Rod End 2 1/2 Inch Weld-On 2.365 Inch X 0.562 Inch Ball Externally Greased Each RockJock 4x4 Drivetrain & Differentials - Transfer Case Seals & Bearings - Transfer Case Intermediate Shaft Bearing 1966-1971 Oldsmobile 442 (Front)RockJock's weld on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy duty,